User Manual

Rig Settings 68
Use the “Rig Tags” soft button in Rig Settings, or “Amp Tags” and “Cabinet Tags” in amplifier and cabinet modules,
to access the list of associated tags. Use the “Scroll” soft knob to select a tag that you would like to fill or modify. The
“Edit” soft button opens the Tag Edit screen with the following controls:
ABC
Use the "ABC" soft knob to switch between upper- and lower-case characters.
<PAGE>
The PAGE Buttons control the position of the cursor.
Character
Use the “Character” soft knob to select a character.
Insert
Use the soft button “Insert” to insert a space before the current cursor position.
Clear
The soft button “Clear” deletes the character at the current cursor position, and closes the
gap. If you hold for about one second, the whole tag is cleared.
COPY
The COPY button stores up to ten tags in the clipboard.
not available at PROFILER Stage
PASTE
The PASTE button recovers tags from the clipboard, in last in first out order.
not available at PROFILER Stage
Done or EXIT
When you have finished editing, press the soft button “Done”, or the EXIT button, to
complete the task.
Alternatively, the PC- and Mac-based KEMPER Rig Manager™ application can be used to modify tags in a very
comfortable manner.