User Manual

Front Panel Controls Head, PowerHead, Rack, and PowerRack 35
To get an overview of the lock status of all modules, press and hold LOCK - all locked modules will be lit, while those
that are unlocked will remain unlit.
✓ The lock function works independently between Performance Mode and Browser Mode. So, you could, for example,
lock your Input Section in Browser Mode while keeping it unlocked in Performance Mode (which happens to be the
default setting).
COPY and PASTE Buttons (17)
Use the COPY and PASTE buttons to grab a module and copy its data to another similar location. For example, you
can copy and paste the settings of one module to another, either within the same Rig, or another Rig entirely. To do
this, select a module and press COPY. Next, select a destination module and press PASTE. Voilà!
✓ Once you have performed the paste, the PASTE button LED will switch off - however, the most recent contents of
the clipboard are retained until the unit is powered off, so you are free to continue pasting them as many times as
you like.
In general, you can use common sense to determine whether the PROFILER will let you copy settings from one
module to another. For example, you cannot copy the Reverb settings to the amp module. However, it is possible to
copy/paste the content between the effect modules A, B, C, D, X, MOD, DLY and REV. Go ahead and try whatever
you want - you will be alerted if what you're attempting is not possible.
STORE Button (18)
Use the STORE button, on the left side of the display, to save any changes you have made to a module, Rig, Slot,
preset, or Performance. Store allows you to save changes to the permanent memory.