User Manual

MIDI 263
MIDI Global Channel
By default, the PROFILER receives MIDI commands on all sixteen MIDI channels (“Omni”). However, if you want to
control multiple devices independently, you can set a specific channel in System Settings on the “MIDI Settings”
page. Now, the PROFILER will only receive messages on that channel.
MIDI Clock
The PROFILER can both receive and send MIDI clock. Find details in the manual section about Tempo.
Transmitting MIDI Commands to Two External Devices in
Performance Mode
MIDI commands can be triggered and transmitted to external devices (maximum 2), whenever a Slot is loaded in
Performance Mode. You can, for instance, use this to switch presets, or to control parameters, of effects devices by
other manufacturers that are connected to the effect loop of the PROFILER.
• In System Settings, navigate to “Performance Mode: MIDI” page. Please note that this page is only accessible in
Performance Mode.
• Use the soft knobs to assign a MIDI channel to each of the external devices.
• Use soft buttons to determine whether the corresponding external devices are connected to MIDI OUT or MIDI
THRU. The MIDI THRU is not available at PROFILER Stage.
• For your convenience, you can also assign meaningful names to the two external devices using soft buttons.
• Press “Edit, “Slot Settings” > “MIDI Settings”, then select the MIDI program change numbers associated with the
currently loaded Slot. Repeat this step for every Slot you intend to send MIDI program changes from.