User Manual

Delay (Green) 196
When you set Feedback to above zero, the whole delay pattern is repeated. The repetition time (and thus pattern
length) is defined by the time of the fourth delay tap (Delay 4). For that reason, the fourth delay tap is always the first
tap of the next repetition.
When “To Tempo” is activated, the time of each tap is adjusted independently in multiples of 16th notes. When To
Tempo is not enabled, then Delay 4 Time is set in absolute milliseconds, again defining the pattern length or
repetition time. Delays 1, 2 and 3 have Ratio settings as a percentage of the milliseconds of Delay 4 Time. Thus, if
you change the setting of Delay 4 Time, then all four delay times are changed accordingly while maintaining their
ratio. This way, the rhythm pattern stays intact, but changes tempo.