User Manual

Wah Effects (Orange) 149
 Pedal Range
This parameter determines the maximum impact of the pedal, as an offset to the value selected for the “Manual”
parameter. Negative values of “Pedal Range” will reverse the swell direction of the pedal or touch effect, so the
effect will go down when you push the pedal forward.
 Peak Range
Determines to what extent the position of the pedal influences the peak intensity. Many original wah pedals have a
dependency between the pedal position and the Q-Factor of the wah filter. This can be controlled by “Peak Range”.
 Pedal Mode
Selects how the wah effect responds to the Wah Pedal, or to touch response.
Off
Wah Pedal has no effect. The effect will be static and can still be controlled by the “Manual”
soft knob.
Touch
Uses the picking strength to control the effect, as described below.
On
Wah Pedal is active. Control the impact of the pedal by the “Range” parameter.
Bypass @ Stop
Wah Pedal is active. The effect will be smoothly faded in when you start moving the pedal,
and smoothly faded out when you stop moving it.
Bypass @ Heel
Wah Pedal is active. The effect will smoothly fade out when you park the pedal at the heel
position
Bypass @ Toe
Wah Pedal is active. The effect will smoothly fade out when you park the pedal at the toe
position