User Manual

Expression Pedals and Foot Switches 130
✓ If “WahPedal >Volume” is selected, those two functions are mutually exclusive. As soon as a wah effect is active, the
Wah Pedal controls this Wah effect, while volume stays flat. As soon as there is no wah effect in the current Rig, or
the wah effect is switched off, the Wah Pedal controls volume.
Then, plug the TRS-cable of the dual switch into the PEDAL 2 input. If this is a KEMPER PROFILER Switch, please
follow the instructions at Connecting a PROFILER Switch. If you are using a switch of any other brand, please follow
instructions at Single and Dual Switches of Other Brands. Don’t forget to press and hold “Calibrate” and trigger each
of the two switches once. Then, navigate to the corresponding "Pedal #" page in System Settings and assign “Rig
up” and “Rig down” to your two switches. In Browser Mode, you can step through the Rigs according to the option
selected for "View" and "Sort Order". In Performance Mode, you can step through Slots and Performances, while
disabled Slots will be skipped automatically. In PROFILER Mode, it switches between “KEMPER Amp” and
“Reference Amp”.
✓ A tutorial video demonstrating how to set-up switches connected to the PROFILER is available at:
www.kemper-amps.com/video