User Manual

Expression Pedals and Foot Switches 126
There is another possible setup with two pedals: you could decide to control Morphing via the Rig Buttons 1-5 of
your Remote or Stage and skip the Morph Pedal controller altogether. In this case, you would end up with a
dedicated volume pedal, plus a wah pedal reassigned to pedal pitch effects. The wah pedal would be set up with
“WahPedal >Pitch”, like in the example Three Pedals: Comfortable above.
One Pedal: Purist
One wah pedal to be shared for volume and pedal pitch effects; for PROFILER Stage use PEDAL 3
There is no way to combine Morph and Volume Pedal as this would imply logical conflicts. Therefore, in this setup
Morphing can only be triggered via the buttons of Remote or Stage - either Rig Buttons 1-5, or via customization of
one of the LOOPER, TUNER or TAP buttons. Alternatively, you could connect an additional external switch and
assign the Morph function to it. We will cover the subject of external switches soon.
The one pedal then needs to be set-up as a wah pedal. The PEDAL 5 input of the Remote, and Pedal 3 input of the
PROFILER Stage, are already prepared for it by default. How to connect and calibrate has been already explained in