User Manual

Expression Pedals and Foot Switches 119
Expression Pedals and Foot Switches
Both PROFILER and PROFILER Remote allow you to connect multiple, independent expression pedals, mono
switches or dual switches for different purposes. Each of the PEDAL inputs on the PROFILER Stage (four inputs), all
other PROFILER variants (two inputs) and PROFILER Remote (four inputs) can hold one expression pedal, one
mono switch or one dual switch.
Alternatively, continuous controllers (CC), as well as switching functions can be controlled via a MIDI foot controller
or sequencer. More information on this subject can be found in the MIDI chapter.
Pedal Controllers
Four important continuous controllers can be driven by expression pedals connected directly, or by MIDI control
changes. Each of these can be controlled via dedicated pedals or MIDI control changes, but there is also the
possibility to combine and share a pedal, or MIDI control change, to control multiple functions. But before we
describe how best to organize your pedals, let's look at those four important pedal controllers:
 Morph Pedal (MIDI control change #11)
This pedal controls simultaneous morphing of multiple, continuous Rig parameters.
The assignment of Morphing to an expression pedal is a global function – however, the parameters to be morphed,
and their respective ranges, are configured within each Rig. So, in one Rig, the Morph Pedal could just control Delay
Mix, while in another it could control Gain, together with Treble, Volume, Amplifier Definition, and many more. So, as
you can see, this one pedal is incredibly versatile. Please find details in the Morphing paragraph, below. Examples
can be found in the Morphing Demo Rig Pack available in Rig Manager and on our web page:
www.kemper-amps.com/downloads