User Manual

Output Section 102
• If you don’t need the MONITOR OUTPUT on stage, you can expand the wet/dry/wet setup to a four-cable
wet/dry/dry/wet setup. Activate “Monitor Stereo” and MONITOR and DIRECT OUTPUT are combined to form a new
stereo sum. Then select the Output Source “Mod Stereo” for the MONITOR OUTPUT, which contains everything
apart from the effects in the DLY and REV modules. Now, you can send two stereo sums to the front mixing desk,
where the delay and reverb signals are separated from the non-reverberant effects (X and MOD).
Wet-dry-dry-wet connections with Monitor Stereo