Certifications 2

Page 4/9
Printing date 17.01.2018
Revision: 17.01.2018
Version: 3
Safety data sheet
according to 1907/2006/EC, Article 31
Trade name: Marder Duftmarken Entferner
(Contd. of page 3)
46.0. 17
.
7.3 Specific end use(s) No further relevant information available.
*
SECTION 8: Exposure controls/personal protection
.
Additional information about design of technical facilities: No further data; see item 7.
.
8.1 Control parameters
.
Ingredients with limit values that require monitoring at the workplace:
CAS: 67-63-0 propan-2-ol (10-25%)
WEL Short-term value: 1250 mg/m³, 500 ppm
Long-term value: 999 mg/m³, 400 ppm
CAS: 112-34-5 2-(2-butoxyethoxy)ethanol (

1.0%)
WEL Short-term value: 101.2 mg/m³, 15 ppm
Long-term value: 67.5 mg/m³, 10 ppm
.
Additional information: The lists valid during the making were used as basis.
.
8.2 Exposure controls
.
Personal protective equipment:
.
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Avoid contact with the eyes and skin.
Do not eat or drink while working.
.
Respiratory protection:
In case of insufficient ventilation and longer exposure, we recommend a respirator with filter type A.
.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
.
Material of gloves
Nitrile rubber.
The gloves should comply with EN 374 and ideally cover the protection class A, J, K, L.
.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves
and has to be observed.
Nitrile rubber.
The gloves should comply with EN 374 and ideally comply with protection class A, J, K, L.
.
Eye protection:
Tightly sealed goggles
.
Body protection: Protective work clothing
GB
(Contd. on page 5)