Data Sheet

M149N | Solar-Laderegler 12 V/DC, 10 A / 20 A
Dieser Solar-Laderegler wird zwischen einer Solarzelle 12 V/DC
(Leerlaufspannung 14 - 30 V/DC) und einem Akku 12 V/DC
geschaltet, um ein Überladen des Akkus zu verhindern. LED-An-
zeigen für: „Akku voll“ (ca. 14,4 V/DC) und „Ladung läuft“.
M149N | Solar Charging Controller 12 V/DC, 10 A / 20 A
This solar charging controller is connected between a solar cell
12 V/DC (open circuit voltage 14 - 30 V/DC) and a battery 12
V/DC to prevent an overcharge of the battery. LED displays for
"BATTERY FULL" (approx. 14.4 V/DC) and “CHARGING”.
Technical data:
Input voltage solar cell panels: 14 - 30 V/DC open circuit volta-
ge | Nominal voltage: 12 V/DC | Max. input current: 10 A,
short-time till 5 min: 20 A | Inrush voltage: battery voltage
approx. <13.4 V | Interrupting voltage: battery voltage approx.
>14.4 V | Displays: 1 LED for “CHARGING”, 1 LED for “BATTERY
FULL” | Own power consumption: <2.5 mA (LED switched on)
ES Regulador de carga solar 12 V/DC, 10 A / 20 A | FR
Régulateur de charge solaire 12 V/DC, 10 A / 20 A | NL
Zonnecel-lader 12 V/DC, 10 A / 20 A | PT Solar regulador
de carga 12 V/DC, 10 A / 20 A | PL Regulator ładowania
solarów 12 V/DC, 10 A / 20 A | RU Солнечный регулятор
зарядки 12 Вольт, 10 А / 20 A
P / Module / M149N / Ver.001 / KV008
110527
www.kemo-electronic.de
Dimensions:
approx. 72 x 50 x 42 mm
(without fastening straps)
Kemo Electronic GmbH
Leher Landstrasse 20
27607 Geestland, Germany