Operation Manual

33
g. Press the „Sauté“ buon on the USER CONTROL PANEL.
h. Aer 8 seconds the cooking process will begin and the STIRRER will begin to
rotate.
NOTE: If you don’t wish to use the STIRRER funcon then simply don’t t the sr-
ring paddle.
i. Aer 10 minutes of pre-heat the buzzer will sound. The Sr Cooker is now ready
for use. The Temperature at this point will be around 120-1400C
j. Add the food that you wish to Sauté
k. Connue to cook unl you are happy with the results, then press the „Keep
Warm / Cancel“ buon to turn your Sr Cooker to „Standby“ Mode.
l. When have served the food turn o and unplug the Cooker allowing it to cool
before cleaning.
NOTE: The Sr Cooker is programmed to switch to „Standby“ Mode aer 30 mi-
nutes of Sauté cooking.
IMPORTANT: Use Plasc or Wooden utensils to avoid damage to the non sck
surfaces.
Pasta
a. Place the INNER POT into the BASE UNIT. Rotate it both le and right to ensure
it is correctly located. It should come to a stop in both direcons when it is seated
properly.
b. Fill the INNER POT with cold water to the 9 CUP mark
c. Place the PASTA POT into the INNER POT.
d. Place the LID on the Sr Cooker
e. Plug the power cord in to the POWER SOCKET, then the Sr Cooker into a wall
socket and switch on.
f. The Sr Cooker will „Beep“ once and the „Keep Warm / Cancel“ LED will ash
slowly.
g. Press the „Pasta“ buon on the USER CONTROL PANEL.
h. The Pasta LED Indicator will illuminate.
i. Aer 8 seconds the cooking process will begin.
j. Aer approximately 25 minutes the buzzer will sound 10 mes and the PASTA
LED will ash.