Operation Manual

27
How to use your Sr Cooker
Before rst use
Unpack your Sr Cooker carefully. Check that no transit damage has occurred and
that all the items shown in the Product Overview secon are present.
We recommend that you retain your packaging so that, in the unlikely event of a
fault developing you are able to return the product in the correct packaging for
best protecon.
Preparing for use
1. Before using your Sr Cooker for the rst me it is good pracce to wash the IN-
NER POT, PASTA POT, STIRRER and the LID rst. Simply wash with warm soapy water,
rinse and dry. Your Sr Cooker is now ready for its rst use.
2. Place the BASE UNIT on a dry, level, heat resistant surface, away from the coun-
ter edge.
3. When you connect your Sr Cooker to the mains supply you will hear a long
„beep“ and the Standby / Keep Warm LED will ash slowly.
4. You can now choose your desired programme from the list shown in the secon
„Sr Cooking Funcons“ below. When you press one of the funcon buons the
indicator light of the funcon you have selected begins to ash. Aer 8 seconds
the selected funcon will begin. During the 8 second period you can select a die-
rent funcon if you accidentally pressed the wrong buon. The new funcon will
then begin aer a further 8 seconds have elapsed.
NOTE: The rst me you use your Sr Cooker you may experience a small amount
of smoke or a slight smell. This is just the manufacturing residues burning o. It is
not a fault or a cause for concern and will soon dissipate
5. IMPORTANT: Important – Do not overll your Sr Cooker. Always leave a space
of around 2.5cm from the top of the inner pot to allow for expansion and for the
contents to boil.
6. Only use plasc or wooden utensils for srring etc. Metal utensils will damage
the non-sck surfaces on the pots.