Manual

Kelvinator Air Conditioning Using the remote control 9
1 Ensure the unit is plugged in and power is available.
2 Be sure the batteries are inserted correctly in the remote
control (the lights on the remote control will be on).
3 Set the time with the CONTROL buttons and confirm by
pressing the CLOCK button.
4 Point the remote control at the indoor unit and press
ON/OFF button to turn the unit on.
The default operating mode is AUTO. Once you select
the operating mode with the remote control, the

memory. The next time the air conditioner will start
operating under the same conditions when you simply
push the ON/OFF button of the remote control.
tips and information
In case of a power cut, the unit being switched off at
the powerpoint, or when changing the remote control
batteries, the microprocessor will return to AUTO mode.
Using the remote control
Automatic operation
When you set the air conditioner to AUTO mode, it will
automatically select cooling, heating (only for reverse
cycle models), or fan only operation depending on which
temperature you have selected and the ambient room
temperature. Once you have selected the operating mode,

Thereafter, the air conditioner will start operating under the
same conditions when you simply push the ON/OFF button
on the remote control.
Start
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts flashing.
1 ON/OFF Button
Press this button to turn the air conditioner on.
The temperature indicator on the indoor unit display
lights up.
2  Button
Press to select AUTO.
3 CONTROL Buttons
Set the desired temperature (normally, set between 21ºC
to 28ºC). The air conditioner will begin functioning after
approximately 3 minutes.
Stop
1 ON/OFF Button
Press this button again to turn the air conditioner off. The
horizontal louvre returns to the closed position upon
shut down.
2
1
3
If the AUTO mode is not achieving the temperature you

tips and information
When the AUTO operating mode is selected, the fan speed
will be automatically controlled and cannot be set.
First use