Manual

10 Operating the air conditioner Kelvinator Air Conditioning
When you select the FAN operating mode the air conditioner
will recirculate the indoor air.
1 ON/OFF Button
Press this button to turn the air conditioner on. The
temperature indicator on the indoor unit display lights up.
2  Button
Press to select FAN.
3 FAN Button


2
1
3
Stop
1 ON/OFF Button
Press this button again to turn the air conditioner off. The
horizontal louvre returns to the closed position upon
shut down.
tips and information
The temperature cannot be set through the remote control
in FAN operating mode.
No fan speed indication displays on the remote control if
Auto fan speed is selected.

between the set temperature and the actual room temperature.
The temperature is regulated while dehumidifying through

off, or by turning the FAN only operation on or off.
fan cooling fan cooling
programmed temperature
time
Start
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the indoor
unit starts flashing.
1 ON/OFF Button
Press this button to turn the air conditioner on. The
temperature indicator on the indoor unit display lights up.
2  Button

3 CONTROL Buttons
Set the desired temperature (normally, set between
21ºC to 28ºC).
2
1
3
Stop
1 ON/OFF Button
Press this button again to turn the air conditioner off. The
horizontal louvre returns to the closed position upon
shut down.
tips and information
In DEHUMIDIFY mode the fan speed is fixed at Low, and
Turbo function can be used.
Dehumidifying operation Fan operation