Use and Care Manual

3
Display
Setting the Time
Open the door to gain access to the programming buttons. Press
and hold the
SET TIME
button until the thermostat says, “Set the
time.”
The hour digits on the display will begin to flash.
4
Use the
RAISE
and
LOWER
buttons to set the hour.
Each press will change the hour by one.
When the hour is set press the
SET TIME
button again. The
minutes digits will begin to flash.
Use the
RAISE
and
LOWER
buttons to set the minutes.
Finally press the
SET TIME
button a third time to save the time.
Hint:
If you disable the voice prompts by pressing the
VOICE
button it
will enable you to scroll though the hours more quickly.