User's Manual

SBS-900 Shore Based Radar Systems
Chapter 9: Planned maintenance
KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook
Page 88 of 240
9.4 Annual maintenance procedure
SBS-900 Annual planned maintenance record sheet
Inspection sheet
1 of 10
Equipment details
Antenna Sub-System
Note
Gearbox/ Antenna Turning Unit Antenna
Part No.
Part
No.
Serial
number:
Serial
No.
Transceiver enclosure
Part number DTX-A7-
Serial
number(s)
Radar Distribution Unit (RDU)
Part number SBS-A1-
Serial
number(s)
Man Aloft Switch (MAS)
Part number SBS-A132
Serial
number
Inspection
date:
(DD/ MM/ YYYY)
Inspected by:
Print: Sign:
Tools
required
' Blower or soft brush.
' Medium flat head screwdriver (for opening RDU and transceiver enclosure).
' Mild detergent
Note: Do not use abrasive cleaners or products containing alcohol.
' Soft abrasive free cloth.
' Safety ohmmeter, bridge Megger or Multimeter.
' Spanners (6mm, 10mm and as required for custom earth attachments).
' Wire brush or emery cloth.
Skill level Basic electrical training, working at heights awareness.
Time Approximately three hours depending on equipment location and accessibility
Note - Advanced ATU and antennas: Please refer to the advanced installation and maintenance
handbook supplied with the equipment for full details on planned
maintenance of advanced equipment.
The maintenance procedure for the Advanced antenna sub-system
is NOT covered or recorded in this document.