User's Manual

SBS-900 Shore Based Radar Systems
Chapter 8: Service display/ RadarView control
KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook
Page 73 of 240
8 Service display/ RadarView control
8.1 Overview
SBS systems can be controlled and radar returns viewed using the optional range of service displays.
Service displays can be used as a maintenance/ commissioning tool or when correctly configured, as
a primary means of system control.
There are a number of service display options for the SBS series as follows:
Service display part number & description
SBS-900-1
SBS-900-2
SBS-900-51
SBS-900-3
SBS-900-4
SBS-A3-2
Single radar sensor
Base components for integration into a 3
rd
party supplied PC
& &
SBS-A3-3
Single radar sensor display
RS232/ ASTERIX control & monitoring
& &
SBS-A3-5
Single radar sensor
LAN/ ASTERIX and RS232 control & monitoring
(No radar input card fitted)
%
&
LAN kit required.
See Note
All service displays are supplied with the following software pre-loaded.
ZM-2283
RadarView software
RadarView Software: This software provides the radar processing and display
and has integrated control and monitoring functions for the SBS series.
Operator instructions: The use and operator instructions for the ZM-2283
RadarView and SBS control software can be found in Annex B.
8.2 SBS-A3-2 Base system
The SBS-A3-2 allows the serial control of a single transceiver system via a customer supplied third
party PC/ Microprocessor. See the options section in the system overview handbook for the minimum
PC specification.
The kit provides all the hardware and software to be installed onto a PC to make the system
compatible with the SBS series and comprises the following:
Kelvin Hughes
part number
Description
SBS-A109 08 l[]e giohn[\f_ '0T( mervice display patch panel and cables
ZM-2283
RadarView software including SBS radar control and replay software for
maintenance displays.
Supports of HPx-200 and/ or Asterix video.
45-980-0041-001 HPx-200 PCI radar interface card
ZM-2602 SBS service display graphic V2
Note: The SBS-A3-5 service display can only be used with the LAN kit is fitted.