User's Manual

SBS-900 Shore Based Radar Systems
Chapter 7: Remote operation instructions
KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook
Page 69 of 240
7 Remote operation instructions
When the Radar Distribution Unit is set to Remote operation, the external
command and display system or track extractor has control of the system.
For test purposes, the optional service display can be configured for Remote
control and be connected to the track extractor (TE) port to test the serial port
functionality.
RDU Local control: With the switch set to Remote, Local control of the system via the Radar
Distribution Unit is NOT possible.
7.1 Remote control operator instructions
External command and display and track extractor
Operator instructions for the external command and display or track extractor systems are not
included in this handbook; please refer to the suppliers system handbooks for instructions.
Service display (optional)
The operator instructions for the service display and service display control software can be found in
Annex A of this handbook.
7.2 External commands
The commands sent and received by the SBS-900 system are detailed in a separate document
reference KSD-4750: Serial Control of SBS Radar Systems which is available upon request.
Alternatively a copy can be found in Annex B of the system installation manual KH-1602-1.