User's Manual

SBS
-
900 Shore
Ba
Ba
sed
Radar Systems
Chapter
6
:
Local operation instructions
KH
KH
-
1602 2
issue 1
:
Standard SBS900 Systems Operator & Maintenance Handbook
Page
64
64
of
240
6.6.5
Default and
Setup
menu
Depending on
the
system status
, the
RDU
front panel will show
Defaults
or
or
Setup
.
Default:
This is the normal operational setting and is u
sed by the operator or system
maintainer to view the system configurations
(read only)
.
Setup:
When configured for commissioning,
the Setup menu is u
sed by a
n authorised
technician or system maintainer
for
configur
ation/
setting to work.
The
Setup menu is
not used during normal operation.
Description:
The basic outline of the menu is detailed on the following pages. Detailed
explanat
ions for each setting can be found in the
S
etting to
W
ork
section of the
system Installation and Commissioning handbook (reference KH
-
1602
1).
Menu variations:
The menu structure can vary depending on the system variant selected. For
example in a single X
band system, the
SharpEye IP Tx B
and
Fan Band B
menus
are not present.
Default m
enu
(normal use)
When the service display is
inactive
(off
-
line)
, t
he
Default
menu
is available
in both
Remote
and
Local
modes
Settings in the
D
efault menus
can
be viewed but
cannot
be adjusted.
or
Setup menu
(Commissioning/ setting to work
)
The
Setup
menu
is only available when the
service display is offline, the
switch is set to
Local
and
the RDU is configured to be commissioned.
Caution:
The Setup menu is
not used
in normal operation as it allows the commissioning
and setting to work of the SBS system.
Incorrect configuration in the setup menus can the system
performance
or inhibit
operation.
The setup menus
must
only be used by a suitably
trained
and authorised
technician or
system
maintainer.