User's Manual

SBS-900 Shore Based Radar Systems
Chapter 6: Local operation instructions
KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook
Page 62 of 240
6.6.4.8 Enclosure
The status of the transceiver enclosure and optional antenna sub-assembly monitoring can be viewed
in the Enclosure menu.
Encl Temp
Internal temperature of the transceiver enclosure in Degrees C.
Note: The temperature sensor is located on SBS
-
A126 PCA.
Oil level MON
Status of the optional oil level monitoring
Note: Advanced antenna sub systems only.
Oil Temp MON
Optional Oil Temperature status
Note: Advanced antenna sub systems only.
ENH Encoder
Shows if an enhanced encoder is enabled or disabled
Note: Enabled for Advanced antenna sub systems only.
WG / FIB / POL
Shows if a polarised antenna is enabled.
Note: Advanced
antenna sub systems only.
Fan A1
Optional SBS-A179
Powered Fan
assembly
Status of Fan A1
Note: In single transceiver systems. Fan
bank A or B may not be present in the
menu structure.
Fan A2
Status of Fan A2
Fan A3
Status of Fan A3
Fan B1
Status
of Fan B1
Fan B2
Status of Fan B2
Fan B3
Status of Fan B3
PSU Tx A: 3.3V
Indicates the power supply voltage.
Note: In single transceiver systems Tx A or Tx B voltages may not be present in the menu.
PSU Tx A: 15V
PSU Tx A: 13V
PSU Tx B: 3.3V
PSU Tx B: 15V
PSU Tx B: 13V
PSU INT: 15V
Indicates the power supply voltage.
PSU INT: 5.0V
Indicates the power supply voltage.
Exit
Exits the Enclosure menu