User's Manual

SBS
-
900 Shore
Ba
Ba
sed
Radar Systems
Chapter
6
:
Local operation instructions
KH
KH
-
1602 2
issue 1
:
Standard SBS900 Systems Operator & Maintenance Handbook
Page
56
56
of
240
6.6.4
Status menu
The
Status menu
on the
Radar Distribution Unit
is used by the
operator or the system
maintainer
to
view
but not configure or adjust
the current system settings.
The
S
tatus
menu
is available on
the RDU
in both
the
R
emote
and
L
ocal
setting.
or
When
Status
is selected from the front panel, the various functions shown below can be selected and
viewed
as described in section
6.2.4
pages
39
39
onwards
6.6.4.1
System status
When the status menu is initially selected the system status is shown
with any active alarms.
In the example shown below, an X
-
band tr
ansceiver is in
Local
control with a
displayed indicating that the AC
mains input B has failed, is switched OFF or there is a fault with the
power supply.
Note
The
,
symbol against
the lower right
button indicates that additional
alarm conditions exist. Pressing the
,
button scrolls through these
alarms.
Example of system status
with active alarms
ALARMS
: When an alarm condition exists, the lower right button will flash red and an audible alar
m
will sound.
To silence the alarm, select the
S
tatus menu and press the
lower right
button. The
audible alarm will
stop however the
alarm condition will continue to display until the condition is cleared.
Where an alarm has been acknowledged and more th
an one alarm condition exists, the display
automatically scrolls through the list of alarms.
See section
6.2.6
page 40
40
for additional information on alarms.
Note:
The alarm shown in the example may not be a
pplicable to the SBS
900 system.