User's Manual

SBS-900 Shore Based Radar Systems

Chapter 6: Local operation instructions

KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook

Page 54 of 240

6.6.3.7 Int. Rejection

The Int. Rejection (Interference Rejection) filtering reduces the effect of in-band asynchronous

interference from other radars thus reducing clutter on screen.

Int. Rejection can be enabled, disabled and configured as shown below.

Note

OFF: Interference rejection OFF/ disabled.

Lower: Select lower of adjacent traces.

Higher: Selects higher of adjacent traces.

Note

Average: Selects the average of adjacent traces.

Note

6.6.3.8 Sweep

Sweep sets the signal sweep direction of the SharpEye

transceiver RF pulses during medium and

long pulse transmissions only.

Sweep UP: Default setting.

Sweep DOWN: This reverses the sequence of the RF pulses and may assist in the reduction

of in-band asynchronous interference from other radars in the same Locality

thus potentially improving the quality of returns.

Note: Higher and Average interference rejection modes cannot be selected, these are for future developments