User's Manual

SBS-900 Shore Based Radar Systems

Chapter 6: Local operation instructions

KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook

Page 47 of 240

6.6 Menus

There are four menus that can be selected from the RDU LCD display.

Menu availability depending on the position of the RDU Local & Remote switch settings as detailed

below:

RDU Menu

availability

Description

Local

control

Remote

Control

Note

This menu contains the operator and maintainer adjustable

parameters for the system such as range mode, Mute ON/

OFF, sea and rain filters etc.

Status

The current status of the system can be viewed but not

adjusted. For example signal status, transceiver run-time and

temperature figures etc.

Default

The setup/ configuration of the system can be viewed but not

adjusted.

Setup

Sb_ R_noj g_ho cm hin [p[cf[\f_ il l_kocl_^ `il hilg[f

system operation. The menu is used by the system maintainer

or commissioning engineer to configure the system.

6.6.1 Navigating within menus

Within all RDU menu structures it is possible to move back and forward between menus

using the left and right buttons located to the side of the LCD front panel:

Note: In local control, the optional service display must be •iff-line to obtain the Control Menu.

Range

mode

power

frequency

Exit