User's Manual

SBS-900 Shore Based Radar Systems
Chapter 10: Corrective maintenance
KH-1602-2 issue 1: Standard SBS900 Systems Operator & Maintenance Handbook
Page 168 of 240
g) Processor removal: The SharpEye
TM
processor is retained into the Enclosure by 17 x 5mm hex
bolts. These should be removed, retained and the processor carefully lifted from the assembly
using the carrying handles.
Caution: Sb_ \ifnm ih nb_ Rb[ljDs_x jli]_mmil cnm_f` LTRS MNS AD QDLNUDC;
removal of these bolts invalidates the warranty status of the unit (see below).
Bolts to be removed DO NOT remove
Note: Some of the bolts circled below are obscured in the drawing.
X-=TaW L[Tec@lXo JebVXffbe
Removal hint: Rotating the processor by 90 degrees makes it easier to remove the unit from
the processor.