User's Manual

SWITCH ING OFF
6 Under normal conditions the user should return to the Standby screen before switching
the system off. This leaves the Radar system in a suitable state to be switched on again
from the Visual Display Unit.
7 Press the System ON/OFF button on the visual display unit to set the unit to off.
8 The Processor Unit, RIU and radar sensors are normally left switched on, and should
only be switched off for maintenance purposes.
9 Refer to KH3200 for the shutdown procedure to return to the Standby screen.
Page 2.4 Issue 5 (Jan 09)
KH2060-2