User's Manual

ERGOPOD (NNR-A18)
47 The Ergopod is de signed for mount ing on the end of a chair arm. It al lows the user to
control the screen func tions from the chair rather than the visual dis play unit.
48 The Ergopod provides the same basic operating facilities as the trackerball and three
pushbuttons on the Radar Displays. In addition, the Ergopod is equipped with a plus (+)
and minus (-) range button, a Clutter button (not used) and a screen select button (not used) -
located on the underside of the main pushbutton area above the trackerball.
49 The Ergopod can be used ‘Stand-alone’ or in Dual configuration with two Ergopods
configured as Master and Slave with shared radar displays.
Con trols
Func tion Pushbuttons
50 The 3 Main pushbuttons are used together with the trackerball to activate/select a
particular function. On-screen guidance as to which button to press is given in the 'Cursor
Cue' window on the screen.
Range (-) & (+) Pushbuttons
51 The Range - and + pushbuttons provide a short-cut to the Range Function on a Radar
Display:
(1) Pressing the minus (-) button decreases the range shown on the screen.
(2) Pressing the plus (+) button increases the range shown on the screen.
Trackerball
52 The Trackerball replicates the unit adjacent to the visual display unit and is used to
position the cursor on the screen, near to or on the function to be activated and to change
parameters once a function is activated.
Issue 5 (Jan 09) Page 1.21
KH2060-1
Figure 16 - Ergopod