User's Manual

MantaDigital Ra dar Processor Unit (MDP-A1 or MDP-A9)
38 The Radar Processor Unit may be bulkhead mounted or fitted into a pedestal unit and
provides the processing of radar data for presenting the radar image on the screen, refer to
Figure 14.
39 The cabling to the unit is via an EMC clamp plate located on the base of the unit.
40 The key operated hinged flap on the front of the Radar Processor Unit provides access to
the Floppy Disk Drive and DVD-ROM Drive. Both the ON/OFF switch on the Processor
Unit and the ON/OFF switch on the Visual Display Unit must be ON for the system to operate.
The DVD-ROM Drive and Floppy Disk Drive allow data to be loaded onto the Radar Processor,
e.g. chart information on Chart Radars.
Issue 5 (Jan 09) Page 1.19
KH2060-1
CD-6885
ISSUE 2
Figure 14 - MantaDigital Radar Processor (MDP-A1, -A9)