ASSEMBLY INSTRUCTION QUEEN METAL BED WITH UPHOLSTERED HB / FB LSF Headboard Post B RSF Headboard Post Headboard Foot board 1PC 1PC 1PC 1PC 13 Rail Section (1) Rail Section (2) Center Support Bar H Front / Rear Center Bar <7 PCS PCS 1PC PCS Bolt | L-Allen Key 4mm K Support Leg Bolt 1 — PCS PCS PCS 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Align the LSF Headboard Post (A) and RSF Headboard Post (B) to the Headboard (C), insert the Bolt (K), turn the L-Allen Key (L) to tighten them. ) Insert the Rail Section (2) (F) to the Rail Section (1) (E), and then insert the Bolt (K), turn the L-Allen Key (L) to tighten them. Attach the Front / Rear Center Bar (H) and Center Support Bar (G) to them.
Attach the Support Leg (I) to the Front / Rear Center Bar (H) and Center Support Bar (G), insert the Bolt (K), turn the L-Allen Key (L) to tighten them. 0 Attach the Rails (E) and (F) to the LSF Headboard Post (A) and RSF Headboard Post (B) and Foot board (D), insert the Bolt (J), turn the L-Allen Key (L) to tighten them. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
