Installation & Assembly

2
1.1
Place (B) back face down on a flat surface and
peel back velcro flap.
Insert (C) back legs onto bolts and attach using
(H1) washers and (H2) nuts. Make sure notch
of (C) back legs are flush with the bottom of (B)
back. Tighten with wrench.
Replace velcro flap.
step 1
Chaise Assembly
2.1
Turn (B) back over. Fit (A) seat onto bolts of
(B) back, aligning sides and bottoms of both
pieces.
2.2
Attach (A) seat to (B) back using (H1) washers
and (H2) nuts.
Tighten with wrench.
step 2