Assembly Instructions

The most important element of correct chair assembly is to tighten the bolt
PROBLEM: Chair is unlevel.
Cause 1:
e chair to be assembled more easily.
Solution:
Loosen each bolt in the seat box (front legs, back corner blocks and back apron) unt
e down
and tighten each bolt. The chair will now be level.
Cause 2:
Solution:
Request a set of floor glides from the e-mail address below.
PROBLEM: Bolts do not fit properly.
Cause:
This issue can occur when the bolts are tightened fully before all bolts are attached. There is a variance in the
alignment of the bolts to allow th
Solution:
fit properly.
Questions?
s as directed. Prematurely
tightening the bolts can lead to numerous issues and w
Dining Chairs
Assembly Troubleshooting Guide
Please reach us and we will be happy to help you.
e chair to be assembled more easily. Tightening the bolts prematurely can
cause the holes for the other bolt
g the remaining bolts not to
Make sure each bolt in the seat box (front
s to become slightly misaligned, causin
fit properly.
legs, back corner blocks and back apron) is loosened until finger
tight. This will allow you to realign the holes, and the bolts will no w
ill lengthen the assembly time. Listed below are the
most common issues in chair assembly and their easy solutions.
ir for about 3 0 seconds. Carefu lly turn the chair upsid
il they are finger tight.
Place the chair upright on th e floor. Sit in the cha
Unlevel chairs can occur if the bolt s are fully tightened before all bolts are attached. There is a variance in the
alignment of this chair to allow th
Unlevel chairs can occur if one or more of the floor glides are missing from the bottom of th e chair leg.