Owner Manual

Page 5 of 7
I. Align the leg support (#3) with the pre-drilled holes of the right
headboard leg (#2R) and the left headboard leg (#2L).
II. Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#C) onto the bolt (#A) and then the flat washer (#D) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies through the leg support (#3) using the
Allen wrench (#E) to lock them with the right headboard leg (#2R)
and the left headboard leg (#2L).
Turn right (clockwise) to tighten
#A x 4 pcs
#C x 4 pcs
#D x 4 pcs
I. With the help of another person, carefully align the headboard
(#1) with the pre-drilled holes of the right headboard leg (#2R)
and the left headboard leg (#2L).
II. Prepare 6 bolt assemblies by inserting FIRST the lock washer
(#B) onto the bolt (#A) and then the flat washer (#C) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies through the pre-drilled holes of the
right headboard leg (#2R) and the left headboard leg (#2L) and
secure those bolts using the Allen wrench (#D) to lock them with
the headboard (#1).
#B x 4 pcs
#C x 4 pcs
#D x 4 pcs