Assembly Instruction

STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from fixture
Bare, or Green
Ground wire
from outlet box
OR
Ground wire
from fixture
Green Ground Screw
on the Crossbar
Figure 4
STEP 5 - Install the Fixture Body
A. Position the ceiling canopy and fixture body onto the Crossbar
Assembly (A). Place the holes in the ceiling canopy over the
mounting screws. Secure the fixture body by using the mounting
balls and hand tighten the mounting balls until snug.
Figure 5
Mounting Screw
Mounting Ball
A
STEP 6 Install Bulbs-
A. Insert bulbs onto sockets and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Figure 6
Socket
Bulb (not
supplied)
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
12.5” Dia.
5.5” Dia.
13.5”
Ceiling Canopy
FINISH: CENTURY SILVER LEAF
2of2