Instruction Manual

Disposal
This product must not be disposed of
as normal household waste at the end
of its useful lifetime. To prevent pos-
sible damage to the environment or
to health due to uncontrolled waste
disposal, this product
must be separated
from other waste and
recycled correctly in
order to ensure sus-
tainable use of the raw
materials.
8. Software for calibrators
The USB interface converter (K-114-A)
enables communication between the
calibrator and a computer. Before you
connect the interface converter to the
computer, install driver K-104 / K-114
(can be downloaded free of charge at
www.keller-druck.com)
Settings on the low pressure
calibrator with the ManoCong
software
Device settings such as the leak
measurement time or the switch-off
time for the low pressure calibrator
can be adjusted using the "ManoCon-
g"software.
Record measurements with the
CCS30 software
The CCS30 software records the data
measured
by the pressure calibra-
tor, and shows them in both graphic
and tabular form. Measured data
can be saved or exported for further
processing. You will nd more in-
formation about the software in the
CCS30 manual.
Step-by-step software installation
Install from
www.keller-druck.com:
1.) K-104 / K-114 driver
2.) (CCS30) Control Center Series 30
3.)ManoCong(ifdesired)
ManoCong
8
Control Center
CCS30