Manual

MAINTENANCE
Your rifle is a precision instrument and to insure reliable
function, it is necessary to follow a routine maintenance
procedure. After firing your rifle, be sure to unload it following
the procedure outlined in the section entitled "Unloading"
before any cleaning or maintenance procedure.
Your rifle should be cleaned by brushing the barrel bore and
chamber with a good powder- removing solvent and bore
brush. Wipe the areas clean with patches or a swab. Using a
small brush dipped in solvent, remove all deposits from
around the breech of the barrel, and chamber, extractor and
adjacent areas which have been subjected to the action of
powder or primer residue. Remove any residue on the frame
with light brushing and a solvent. After cleaning the entire
gun, use a cloth to apply a light coating of high quality gun oil
to all external surfaces and wipe clean.
For a more detailed cleaning, the rifle should be
disassembled as described in the section "Disassembly".
SERVICE
Should your SUB rifle require adjustment, refinishing, or
repair, it should be returned unloaded to the factory. In
shipping the SUB rifle, be sure to adhere to the following
rules:
Individuals who wish to return the firearm for service can do
so by shipping via UPS prepaid. No return authorization
number is required.
Include a letter of instruction, full name, address, phone
number and the gun's serial number. This will insure prompt
service and handling. Once your rifle has been received,
anything other than warranty work, will receive a quotation.
You will be notified of full charges and no work will
commence before receiving your approval of our quotation.
Also see Warranty Page for further instructions.
All quotations are payable by C.O.D., VISA, M.C. or money
orders only. No personal checks accepted. Please return
your SUB rifle to:
Kel-Tec CNC, Inc. Service Dept.
1475 Cox Road
Cocoa FL 32926