Manual

Loading
To load, fill the magazine by pressing a cartridge
downward on the forward portion of the magazine
follower (or downward on the case of the previously
loaded cartridge) and sliding the cartridge fully under
the lips of the magazine until the cartridge is all the
way back in the magazine.
Repeat the steps above for the number of cartridges
you wish to load, up to the magazine capacity. Do
not attempt to load your magazine with more than the
specified number of rounds because doing so can
cause a feeding malfunction.
Hold the rifle in one hand with the muzzle pointing in
a safe direction and with your finger off the trigger
and outside the trigger guard. Insert the loaded
magazine into the grip until it is locked in place.
Check to assure that the magazine is secure. Pull
the bolt back and release. If the bolt is already back,
pull back a short distance rotate right and allow the
bolt to carry fully forward. This strips a round from
the magazine and seats it in the barrel chamber.
If you wish to restore the magazine in your rifle to full
capacity, press the magazine catch and remove the
magazine to load the missing round. Never load
rounds directly into the chamber. Remember to
keep your rifle pointed in a safe direction under all
conditions and always keep your finger off the trigger
and outside the trigger guard until ready to fire.