Manual

Firing
With the muzzle pointed in a safe direction and your
finger outside the trigger guard, take aim at a safe
target, put the safety into fire position and squeeze
the trigger until round is fired. Release trigger and
you are ready to fire another round. Upon firing, the
bolt moves rearward extracting and ejecting the fired
round and returns to forward position feeding another
round automatically while doing so. This sequence
can be repeated until the last round has been fired.
The SUB 2000 has no automatic stop, but the bolt
can be locked in back position by rotating the
operating handle to the left.
Unloading
To unload the SUB rifle, push in the magazine catch,
remove the magazine and briskly pull the bolt back
to extract the round in the chamber. Do not obstruct
the ejector port and keep fingers away from trigger
and muzzle. Lock the bolt in back position and visually
inspect the chamber to make sure it is empty. Push
the remaining cartridges in the magazine forward and
out.