Manual

17
Figure 9: As the bolt moves forward, it pushes the round out of the magazine
When the bolt has traveled to its forward most position the bolt’s rear will be pushed
downward against a flat bearing surface inside of the receiver called the shoulder. The
Extractors on the bolt will then slide downward over the rim of the chambered round and
grasp it firmly.
Figure 10: The extractors above the rim of a chambered cartridge.
18
Figures 11: The extractors slide down over the rim of the chambered cartridge
After the shooter acquires a proper sight picture on the target, move the selector
from “S” for “Safe” to “F” for “Fire”. Pulling the trigger will actuate the sear, which releases
the sear bar linkage that contains the hammer springs.
Figure 12: The trigger mechanism in forward position