Manual

14
MAINTENANCE
Your pistol is a precision instrument and to insure reliable function, it is necessary to
follow a routine maintenance procedure. After firing your pistol, be sure to unload it
following the procedure outlined in the section entitled "Unloading" before any
cleaning or maintenance procedure.
Your pistol should be cleaned by brushing the barrel bore and chamber with a good
powder removing solvent and bore brush. Wipe the areas clean with patches or a
swab. Using a small brush dipped in solvent, remove all deposits from around the
breech of the barrel, chamber, extractor, and adjacent areas which have been
subjected to the action of powder or primer residue. Remove any residue on the
frame with light brushing and a solvent. After cleaning the entire gun, use cloth to
apply a light coating of high quality gun oil to all external surfaces and wipe clean.
For a more detailed cleaning, the pistol should be disassembled as described in the
section "Disassembly"
SERVICE
Should your pistol require adjustment, refinishing, or repair, it should be returned
to the factory, unloaded.
In shipping the pistol, be sure to adhere to the following rules:
Individuals who wish to return the handgun for service can do so by shipping it
prepaid to the address below. No return authorization number is required.
Include a letter of instruction, full name, address, telephone number, and the gun's
serial number. This will insure prompt service and handling. Once your pistol has
been received, anything other than warranty work will receive a quotation. You will
be notified of full charges and no work will commence before receiving your approval
of our quotation.
All quotations are payable by money orders, Visa, & MasterCard only.
No COD's or personal checks will be accepted. Please return your Pistol to:
KEL-TEC CNC, INC
SERVICE DEPT.
1475 COX ROAD
COCOA, FL 32926