Brochure

www.keithley.com
1.888.KEITHLEY (U.S. only)
Side Text
ACCESSORIES
A GREATER MEASURE OF CONFIDENCE
Cables
Model 7152-TRX-10: Set of five 3m (10 ft) low
noise triax cables terminated at one end in a
single M-series connector block and at the other
end in 3-slot triax connectors. This cable is most
useful for direct connection to electrometers
and Source/Measure Units.
For use with: 7152, 8006
Model 7153-TRX: 2m (6.6 ft) low noise cable
assembly with M-series connector at one end for
row or column connections to the 7153, and five
3-slot male triax connectors at the other end.
Two 7153-TRX cable assemblies are required to
make all connections to the 7153 card.
For use with: 7153
Model 7173-50-CSEP: The 7173-50-CSEP cable
set provides the capability to expand a switching
configuration to include more than one 7173-50.
Each set contains four 0.6m (25 in) cables. One
cable is required to expand each row or column
connection between adjacent cards. For exam-
ple, using two 7173-50 cards to create a 4×24
matrix would require connecting the rows of
two adjacent cards together. One 7173-50-CSEP
set has enough cables to do this. Connecting the
12 columns together on two adjacent cards cre-
ates an 8×12 matrix. This would require three
7173-50-CSEP sets, 12 cables.
For use with: 7173-50
Model 7705-MTC-2: 2m (6.6 ft) 50-conductor
male to female D-sub cable assembly.
For use with: 7703, 7705, 7707, 7709, 7701
Model 7707-MTC-2: 2m (6.6 ft) 25-conductor
male to female D-sub cable assembly.
For use with: 7701, 7707, 7709
Model 7711-BNC-SMA: Male SMA to female
BNC cables (5 each), 0.15m (0.5 ft) in length.
For use with: 7711
Model 7712-SMA-1: SMA cable, male to male,
1m (3.3 ft).
For use with: 7116-MWS, 7711, 7712, System
41, System 46, System 46T
Cables