Brochure

1.888.KEITHLEY (U.S. only)
www.keithley.com
Side Text
ACCESSORIES
A GREATER MEASURE OF CONFIDENCE
Cables
Model 7009-5 Shielded RS-232 Cable: 1.5m
(5 ft) RS-232 cable with a male DB-9 connector
at one end and a female DB-9 connector on the
other end. Wired as a straight through, not as a
null modem cable.
For use with: All RS-232 capable instruments
Model 7011-MTC-1: 1m (3.3 ft) mass terminated
cable assembly for connection to 7011-C and
other switching cards. The cable has 45 pairs
with outer shield. The cable is terminated at
each end with 96-pin female DIN connectors
with strain relief. Also available in 2m (6.6 ft)
length (Model 7011-MTC-2).
For use with: 7011-C, 7012-C, 7013-C, 7015-C,
7018-C, 7021, 7022, 7037
Model 7019C-MTC-1 Kelvin Extender Cable:
2m (6.6 ft) extension cable set for the Model
7019-C 6-wire Ohms Matrix Card. Provides
cabling to the DUT and is used for matrix
expansion.
For use with: 7019-C
M o d e l 7 0 1 9 C - M T C I - 2 6 - w i r e K e l v i n E x t e n d e r
and Instru ment Cable: Used with Model
7019-C 6-Wire Ohms Matrix Card and a
SourceMeter instrument. The Source Meter
cables are 0.6m (2 ft) long and the DUT cables
are 2m (6.6 ft) long. The cable set is used in a
basic system to test a resistor network.
For use with: 7019-C, Series 2400
SourceMeter Instruments
Model 7020-MTC-2: 2m (6.6 ft) mass terminated
cable assembly for connection to 7020. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7020
2 Slot Triax
Model 7024-* 2-slot Triax Cable: Low noise
triax cable (SC-22) with 2-slot male triax connec-
tors on each end.
7024-3 0.9m (3 ft)
7024-10 3m (10 ft)
For use with instruments with 2-slot triax
connectors
2 Slot Triax
Model 7025-10 2-slot Triax Cable: 3m (10 ft)
low noise triax input cable (SC-22) terminated
on one end with 2-slot male triax connector.
For use with instruments with 2-slot triax
connectors
Cables