Brochure

www.keithley.com
1.888.KEITHLEY (U.S. only)
Side Text
ACCESSORIES
A GREATER MEASURE OF CONFIDENCE
Model 4200-TRX-*: Ultra low noise PreAmp
triax cable terminated with a standard 3-slot
male triax connector on each end. This cable
connects a Model 4200-PA PreAmp option
installed in the Model 4200-SCS to the
test fixture.
4200-TRX-0.3: 0.3m (1 ft) (recommended for
remote location of the 4200-PA)
4200-TRX-1: 1m (3.2 ft)
4200-TRX-2: 2m (6.5 ft) (two included with each
Model 4200-PA)
4200-TRX-3: 3m (9.8 ft)
For use with: 4200-PA
Model 4801 Input Cable: Low noise coax cable,
1.2m (48 in) in length, with male BNC con nec-
tors on each end.
For use with: 6485, 7158
Model 4802-10: 3m (10 ft) of low noise coax
cable with male BNC connector at one end and
unterminated at the other.
For use with: 6485, 7158
Model 4803 Low Noise Cable Kit: In cludes
15m (50 ft) of low noise coax cable, 10 male BNC
con nec tors, and 5 female BNC chassis-mount
connectors.
For use with: 6485, 7158
2 Slot Triax
Model 6011 2-slot Triax Cable: 1.5m (5 ft) of
tri ax cable (SC-22) ter mi nat ed with a 2-slot triax
plug on one end and three alligator clips on the
other. Also available in 3m (10 ft) length (Model
6011-10).
For use with instruments with 2-slot triax
connectors
Model 6517-ILC-3 Interlock Cable: De sign ed to
connect the Interlock of the 6517A with the 8009
test fixture. Configuring the 6517A with the 8009
test fixture results in all the elec trode constants
already being programmed into the unit.
For use with: 6517A Electrometer, 8009
Model 6517B-ILC-3 Interlock Cable: De sign ed
to connect the interlock of the 6517B with the
8009 test fixture. Configuring the 6517B with the
8009 test fixture results in all the elec trode con-
stants already being programmed into the unit.
For use with: 6517B Electrometer, 8009
Cables
Cables