Brochure

1.888.KEITHLEY (U.S. only)
www.keithley.com
Side Text
ACCESSORIES
A GREATER MEASURE OF CONFIDENCE
Cables
Model 3720-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3720-MTC-1.5: 1.5m (5 ft) length
3720-MTC-3: 3m (10 ft) length
For use with: 3720, 3723, 3724
Model 3721-MTC-*: 50-pin D-sub female to
50-pin D-sub male cable.
3721-MTC-1.5: 1.5m (5 ft) length
3721-MTC-3: 3m (10 ft) length
For use with: 3721, 3730, 3731, 3740, 3750
Model 3722-MTC-*: 104-pin D-sub male to
104-pin D-sub female cable.
3722-MTC-1.5: 1.5m (5 ft) length
3722-MTC-3: 3m (10 ft) length
For use with: 3722
Model 3722-MTC-*/MM: 104-pin D-sub male to
104-pin D-sub male cable.
3722-MTC-1.5/MM: 1.5m (5 ft) length
3722-MTC-3/MM: 3m (10 ft) length
For use with: 3722
Model 3732-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3732-MTC-1.5: 1.5m (5 ft) length
3732-MTC-3: 3m (10 ft) length
For use with: 3732
Model 4200-MTRX-*: Ultra low noise SMU triax
cable is terminated with a miniature male triax
connector on one end and a standard 3-slot
male triax connector on the other end. This
cable connects a Model 4200-SMU or 4210-SMU
source measurement unit installed in a Model
4200-SCS to a test fixture. (4200-MTRX-* cables
are intended only for connection to an SMU that
does not have a 4200-PA PreAmp installed.)
4200-MTRX-1: 1m (3.2 ft)
4200-MTRX-2: 2m (6.5 ft) (two included with
each 4200-SCS SMU not configured with a
4200-PA Remote PreAmp)
4200-MTRX-3: 3m (9.8 ft)
For use with: 4200-SCS
Model 4200-PRB-C: SMA to SSMC Y adapter
cable with local ground that connects the
4200-PIV package to DC probe manipulators.
The cable is terminated at one end with a single
female SMA. The other end splits into two
gold SSMC plugs (female connectors) and a
black wire with integrated connector, which is
used to connect to the shield of another Model
4200-PRB-C cable.
For use with: 4200-PIV, 4210-CVU
Model 4200-RPC-*: Remote PreAmp cable
terminated at each end with a high density
DB15 connector. This cable connects a Model
4200-SMU or 4210-SMU source measurement
unit installed in a Model 4200-SCS to a remotely
mounted Model 4200-PA PreAmp.
4200-RPC-0.3: 0.3m (1 ft) (for use inside prober
shield)
4200-RPC-2: 2m (6.5 ft) (one included with each
4200-PA)
4200-RPC-3: 3m (9.8 ft)
4200-RPC-6: 6m (19.6 ft)
For use with: 4200-PA
Cables