Brochure
www.keithley.com
1.888.KEITHLEY (U.S. only)
Side Text
ACCESSORIES
A GREATER MEASURE OF CONFIDENCE
Model 236-ILC-3 Safety Interlock Cable:
Designed to connect the lid interlock circuit of
the Models 8007 and 8008 test fixtures to the
interlock circuit of the Model 237 SMU and 486
and 487 Picoammeters.
For use with: 237, 4200-SCS, 8007, 8008
Model 237-ALG-*: Low noise triax cable (SC-22)
terminated with a 3-slot male triax connector on
one end and 3 alligator clips on the other.
237-ALG-2 2m (6.6 ft) length
237-ALG-15 15m (50 ft) length
For use with: 237, 486, 487, Series 2200,
Series 2600A, 4200-PA, 6220, 6221, 6487,
6514, 6517A, 6517B
Model 248-MHV: 3m (10 ft) of RG-8A/U coax
cable terminated with a SHV female connec-
tor on one end and a MHV male connector on
the other. Maximum operating voltage (rms)
is 5,000V.
For use with: 248
Model 248-SHV: 3m (10 ft) of RG-8A/U coax
cable terminated with a SHV female connector
on both ends. Maximum operating voltage (rms)
is 5,000V.
For use with: 248 and CS-970
Model 2000-MTC-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that is
designed to mate with the 2000-20 scanner card.
The other end is unterminated for direct connec-
tion to measurement fixtures or devices.
For use with: 2000-20
Model 2000-MTCD-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that
is designed to mate with the 2000-SCAN-20
scanner card. The other end is equipped with a
50-pin D-sub male connector.
For use with: 2000-SCAN-20
Model 2107-* Low-Thermal Input Cables with
Spade Lugs: An input cable terminated with a
LEMO connector on one end and four copper
spade lugs on the other.
2107-4 1.2m (4 ft) length
2107-30 9.1m (30 ft) length
2107-50 15m (50 ft) length
For use with: 2182A, Series 2200
Model 2600-ALG-2: 2m (6.6 ft) cable terminated
with a 3-slot male triax connector on one end
and 3 alligator clips on the other.
For use with: 2635A, 2636A, 4200-PA
Model 2651A-KIT-*: High current, low impe-
dance, coaxial cable assembly.
2651A-KIT-1: 1m (3.3 ft).
2651A-KIT-2: 2m (6.6 ft).
2651A-KIT-3: 3m (10 ft).
For use with: 2651A, 8011
Cables
Cables