Datasheet

Datasheet
TEK.COM4
Convert Raw Data to Information
A full graphical plotting window converts raw data and displays it immediately as useful information, such as semiconductor
I-V curves and waveforms. Using the 2470’s Sheet view, test data can also be displayed in tabular form. The instrument
supports exporting data to a spreadsheet for further analysis, dramatically improving productivity for research, benchtop
testing, device qualification, and debugging.
Built-in data display, charting, and spreadsheet export functions simplify converting test results into useful information.
TriggerFlow
®
Building Blocks for
Instrument Control and Execution
The 2470 incorporates Keithley’s TriggerFlow triggering
system, which provides user control of instrument
execution. TriggerFlow diagrams are created in much
the same way that flow charts are developed, using four
building blocks:
• Wait – Waits for an event to occur before the flow
continues
• Branch – Branches when a condition has
been satisfied
• Action – Initiates an action in the instrument, for
example, measure, source, delay, set digital I/O, etc.
• Notify – Notifies other equipment that an event
has occurred
TriggerFlow building blocks allow creating triggering models that range
from very simple to highly complex.
A TriggerFlow model using a combination of these building
blocks can be created from the front panel or by sending
remote commands. With the TriggerFlow system, users
can build triggering models from very simple to complex
with up to 255 block levels. The 2470 also includes basic
triggering functions, including immediate, timer, and
manual triggering.