Datasheet

Model 2461 Interactive SourceMeter® Instrument User's Manual Section 10: Capturing high-power pulse waveforms
2461-900-01 Rev. A / November 2015 10-3
The following figure shows the schematic for outputting high-current pulses to a resistor.
Figure 56: Model 2461 4-wire connections to a resistor
The following figures show the physical connections for the front and rear panels. The front-panel
connections are safety banana jacks; the rear-panel connection is a screw terminal.
The figure below shows the front-panel connections. You can use four insulated banana cables that
are rated to a maximum current of at least 10 A, such as two sets of the Keithley Instruments Model
8608 High-Performance Clip Lead Set (one set is included with the Model 2461).
Figure 57: Model 2461 4-wire connections to the front panel