Datasheet

Model 2461 Interactive SourceMeter® Instrument User's Manual Section 7: Generating an I-V sweep on an LED with KickStart
2461-900-01 Rev. A / November 2015 7-5
Launch KickStart and set up the test
Once the communication cable is connected to the computer and the TSP command set is enabled,
you are ready to launch the KickStart software.
To create a new test project:
1. Launch the KickStart software. The Start Page is displayed, as shown in the following figure.
Figure 37: KickStart Startup Software Start Page
2. On the Start Page, click New KickStart Test. The Save As dialog box opens.
3. Navigate to the location where you want to save your test projects (you do not need to create a
folder; KickStart creates the folder for you). You can also use the default location for KickStart
projects, which is C:\Users\My Documents\Keithley Instruments\KickStart.
4. Enter a name for the test and click Save. The test is saved as a .kst file in a folder with the
name of the test project.