Datasheet

Figure 6a. Individual waveform display of simultaneous input current and output voltage measurement.
Figure 6b. Combining input current and output voltage onto a single display.
Figure 6c. Zooming.
waveforms to examine the dynamic behaviors in detail. For more
information and support on TSP programming and simultaneous
measurement, refer to the Reference Manual for the Model
DMM7510 or the Keithley website (www.keithley.com).
All readings and timestamps are easily accessible through the
Reading Table under the main MENU. You can select any defined
buffer in the instrument to display. To save these readings to a
thumbdrive, start by inserting a USB thumbdrive into the port
on the front panel. Press the MENU key. Select Reading Buffers,
press the desired buffer, and then press Save to USB. The data
will be saved in the .csv format, so it can later be downloaded
and imported into a spreadsheet. TIP: Press the HOME and the
ENTER keys on the front panel at the same time to save a screen
capture to a USB thumb drive.