Datasheet

Model DMM7510 7-1/2 Digit Graphical Sampling Multimeter Specifications
Specifications and characteristics are subject to change without notice.
Page 24 of 25 SPEC-DMM7510 Rev. B / October 2016
GENERAL INSTRUMENT SPECIFICATIONS
SPECIFICATION CONDITIONS
This document contains specifications and supplemental information for the DMM7510 Precision Sampling
Digital Multimeter instrument. Specifications are the standards against which the DMM7510 is tested. Upon
leaving the factory, the DMM7510 meets these specifications. Supplemental, typical, and characteristic
values are non-warranted, apply at 23 °C, and are provided solely as useful information. All specifications
apply to front or rear terminal inputs, except 10 A specifications (rear-terminals only).
Input protection
1010 V DC (715 V
RMS
V AC) all ranges and functions on HI and LO
terminals; 350 V all ranges and functions on sense HI, sense LO
terminals; 250 V rated current input terminal; fused 3 A and 10 A
ranges; current input terminals protected to 1 kV
3 A input fuse protection
3.5 A, 1 kV fast blow type; Keithley part number
DMM7510-FUSE-3A
10 A input fuse protection
11 A, 1 kV fast blow type; Keithley part number
DMM7510-FUSE-10A
AC voltage input
Maximum DC voltage: 1000 V on any AC voltage range
Common mode isolation
500 V DC or AC V
peak
LO to chassis
All terminals > 10 GΩ, < 350 pF any terminal to chassis
Power line
Universal input, 100 V to 240 V
Line frequency
50 Hz or 60 Hz, automatically sensed at power-up
Power consumption
60 VA
Operating environment
Specified for 0 °C to 50 °C, ≤ 80 % relative humidity at 35 °C,
altitude up to 2000 meters
Storage environment
-30 °C to 70 °C
Real time clock
Lithium battery backup (3+ years battery life)
EMC
Conforms to European Union EMC Directive
Safety
NRTL listed to UL61010-1, and CSA C22.2 No 61010-1; conforms
with European Union Low Voltage Directive
Vibration
MIL-PRF-28800F Class 3, Random
Warm-up
90 minutes to rated accuracy
Input signal connections
Front and rear safety banana jacks
Cooling
Forced air, fixed speed
Dimensions Without handle and bumpers: 88 mm high × 213 mm wide ×
410 mm deep (3.46 in. × 8.39 in. × 16.13 in.)
With handle and bumpers (bench configuration): 106 mm high ×
255 mm wide × 425 mm deep (4.18 in. × 10.05 in. × 16.75 in.)
Shipping weight (with bumpers and handle)
4.08 kg (9.0 lb)
Shipping weight (without bumpers and handle)
3.63 kg (8.0 lb)