Datasheet

Model DMM7510 7-1/2 Digit Graphical Sampling Multimeter Specifications
Specifications are subject to change without notice.
SPEC-DMM7510 Rev. B / October 2016 Page 21 of 25
TYPICAL READING RATES, 60 Hz (50 Hz) OPERATION
90,91,92,93
Functions:
DC voltage (10 V)
2-wire ohms (≤ 10 k
),
DC current (1 mA)
Functions:
4-wire ohms (≤ 1 k
)
4-wire / 3-wire RTD
Functions:
Thermistor
Functions:
Dry circuit (≤ 1 k
)
NPLC Digits Measure-
ments into
buffer
Measure-
ments into
computer
Measure-
ments
into
buffer
Measure-
ments
into
computer
Measure-
ments into
buffer
Measure-
ments into
computer
Measure-
ments
into
buffer
Measure-
ments
into
computer
1 59.8 (49.8) 58 (48) 29 (24) 28 (24) 57 (48) 57 (48) 27 (23) 26 (22)
0.2 295 (240) 250 (210) 128 (109) 119 (100) 230 (200) 230 (200) 100 (89) 96 (85)
0.06 965 (810) 950 (800) 310 (280) 315 (280) 900 (750) 900 (750) 190 (180) 190 (180)
0.006 7500 (6700) 7300 (6500) 750 (730) 740 (720) 6800 (6000) 6800 (6000) 295 (290) 295 (290)
0.0005 26000 (26000) 24000 (24000) 860 (860) 860 (860) 18000 (18000) 18000
(18000)
310 (310) 310 (310)
Functions:
AC voltage, AC current
Detector bandwidth (Hz) Digits Measurements into
buffer
Measurements into
computer
3 0.5 (0.5) 0.5 (0.5)
30 3.3 (3.3) 3.3 (3.3)
300
94
59.8 (49.8) 55 (46)
300
94
26200 (26200) 24500 (24500)
DIGITIZE, TYPICAL
Sampling rate Digits Resolution Measurements into computer
93
10 kS/s 18 9700
20 kS/s 16 19000
50 kS/s 16 44400
100 kS/s 15 80000
1 MS/s 12 108000
90
Reading speeds for autozero off, fixed range, autodelay off. Offset compensation off and open lead detector off where applicable.
91
Buffer measurements: For < 0.2 PLC, multisample, single buffer transfer binary reading only.
92
PC measurements: For 1 and 0.2 PLC single reading and single transfer to computer (USB).
93
Reading rates using factory default operating conditions and autorange off, autodelay off. Speeds include measurement and data transfer out
of the USB. 1000 readings with binary transfer over USB.
94
For bandwidth 300 Hz, autozero off, 6½ digits at 1 PLC, digits at 0.0005 PLC.